PV411A | Bomba manual generadora de presión

Bomba manual cuatro en uno de Druck

La PV411A es una bomba manual de presión y vacío de alta calidad, probada en campo, que ofrece una funcionalidad nunca vista hasta ahora en una fuente de presión portátil. Este extraordinario producto sustituye a cuatro bombas manuales convencionales

Descripción

La PV411A es la herramienta de campo ideal para aplicar presiones de prueba y calibración a sensores, manómetros, interruptores, indicadores y registradores. También es una fuente de presión de bajo coste para talleres y laboratorios. Esta amplia capacidad elimina la necesidad de llevar varias bombas manuales.

  • Características
  • Presiones hidráulicas de 0 a 700 bar (0 a 10.000 psi)
  • Presiones neumáticas hasta 60 bar (900 psi)
  • Vacío hasta -0,95 bar (-28,5 in Hg)
  • Protección contra sobrepresión ajustable
  • Control fino de baja presión

La PV411A (4 en 1) es una bomba manual de presión y vacío de alta calidad, probada en campo, que ofrece una funcionalidad nunca vista hasta ahora en una fuente de presión portátil. Este extraordinario producto sustituye a cuatro bombas manuales convencionales y ofrece las siguientes características adicionales:

  • La exclusiva función de cebado por vacío elimina el aire atrapado durante el funcionamiento hidráulico
  • La generación de alta presión se consigue con el ajustador de volumen, eliminando el esfuerzo físico asociado a las bombas manuales convencionales
  • La válvula selectora de presión/vacío también proporciona un excepcional alivio de presión con control fino tanto en modo neumático como hidráulico
  • Válvula de protección contra sobrepresión ajustable a prueba de manipulaciones, que puede configurarse para aliviar presiones de 20 a 700 bar (300 a 10.000 psi)
  • Depósito hidráulico extraíble que puede desconectarse de la bomba sin vaciar el fluido
  • Función de seguridad del depósito con tapa superior con muelle que ventila si se presuriza inadvertidamente por encima de 8 psi
  • Modo hidráulico diseñado para funcionar con agua destilada y/o aceite mineral de alta viscosidad
  • El ajustador de carrera integrado controla la presión/vacío generado por carrera
  • Cabezal giratorio de 240° para una visualización óptima de los indicadores de referencia
  • Las piezas móviles internas están anodizadas con PTFE para reducir la fricción y el desgaste
  • Diseño robusto y ligero con empuñadura cómoda

Industrias

Pruebas en Vuelo y en Tierra

Druck ofrece una amplia gama de sensores de presión tanto para tierra como para vuelo. Si busca precisión, la tecnología de sensores de presión TERPS® de Druck es nuestro nivel de rendimiento más alto disponible. El resultado de varias innovaciones clave…

Petróleo y gas

En las industrias del petróleo y el gas, la fiabilidad, la precisión y la estabilidad son cruciales para garantizar operaciones seguras y eficientes. Druck ha sido un proveedor de confianza de sensores de presión de alto rendimiento durante más de 50 año…

Marino

Los sensores de presión Druck son esenciales en la industria marina, ya que proporcionan mediciones precisas y fiables que garantizan la seguridad, la eficiencia y el rendimiento de diversos sistemas marinos. Estos sensores están diseñados para soportar …

Generación de energía

In the dynamic and demanding power generation market, precision and reliability are paramount. Druck has been at the forefront of pressure sensing technology for over 50 years, providing innovative solutions that ensure optimal performance and safety in …

Automoción

Druck fabrica sensores de presión diseñados para ofrecer exactitud y precisión. Somos una de las tecnologías líderes en el mundo de las pruebas industriales. Cuando se trata de la recopilación de datos en aplicaciones industriales, hay tres áreas clave a…

Aplicaciones

Calibración de presión y prueba de presión

FAQs

Both threads are G1/8 (1/8 BSP) female.

Yes, the PV211-TC transit case has space to store the DPI 104.

The Quick Fit Adaptor is available as a spare part, the part number is 1S-01-0827

PV211 (Pneumatic Hand Pump – BSP Version) consists of :
Hand Pump + Hose Assembly with 1/4BSP female Quick Fit Adapter + Adapters and
Washer (seal) as shown below

https://www.bakerhughes.com/sites/bakerhughes/files/2024-08/pv211-14_pneumatic_hand_pump_npt_version_consists_of_1.jpg

PV211-P (Pneumatic Hand Pump Kit – BSP Version) Consists of:-

All parts shown in PV211 above plus the following:-

https://www.bakerhughes.com/sites/bakerhughes/files/2024-08/pv211-14_pneumatic_hand_pump_npt_version_consists_of_2_1.jpg

Carry Case, BSP Seal Kit and BSP Quick fit Adapters shown below.

https://www.bakerhughes.com/sites/bakerhughes/files/2024-08/pv211-tc_transit_case_consists_of_1.jpg

PV211-14 (Pneumatic Hand Pump – NPT version) consists of:-

Hand Pump + Hose Assembly with 1/4NPT female Quick Fit Adapter + 1/4 NPT Female Adapter and Washer (seal) as shown below.

https://www.bakerhughes.com/sites/bakerhughes/files/2024-08/hand_pump_hose_assembly_with_1_4bsp_female_quick_fit_adapter_adapters_and_washer_seal_as_shown_below_2_1.jpg

PV211-14-HA (Pneumatic Hand Pump Kit – NPT Version) Consists of:-

All parts shown in PV211-14 above plus the following:-#

https://www.bakerhughes.com/sites/bakerhughes/files/2024-08/hand_pump_hose_assembly_with_1_4bsp_female_quick_fit_adapter_adapters_and_washer_seal_as_shown_below.jpg

Carry Case and NPT Quick fit Adapters shown below.

https://www.bakerhughes.com/sites/bakerhughes/files/2024-08/carry_case_bsp_seal_kit_and_bsp_quick_fit_adapters_shown_below_1.jpg

PV211-HK (Hose Assembly) Consists of:-

The hose and Adapters shown below.

https://www.bakerhughes.com/sites/bakerhughes/files/2024-08/pv211-hk_hose_assembly_consists_of_1.jpg

PV211-TC (Transit Case) Consists of:-

Black Plastic Carry Case with upper and lower foam inserts, plus BSP Seal Kit

https://www.bakerhughes.com/sites/bakerhughes/files/2024-08/pv211-tc_transit_case_consists_of_2.jpg

PV211-SK (Service Seal Kit):-

Please refer to attached Service Instruction sheet for contents of the Seal Kit. – here > https://www.bakerhughes.com/sites/bakerhughes/files/2024-06/dsi0904_service_instructions_pv211-sk_seal_kit.pdf

The top port is 3/8 BSP and the side port is 1/8 BSP.

The PV211-14-HA kit contains the PV211 hand pump with a 1/4 NPT female adaptor fitted
into the top port and a 1 metre (3ft) flexible hose that has a 1/4 NPT female pressure
connector (please see the image on page 2 of the attached datasheet).
The adaptors shown below are also supplied with the hand pump.
Datasheet – chrome-extension://efaidnbmnnnibpcajpcglclefindmkaj/https://www.bakerhughes.com/sites/bakerhughes/files/2024-08/datasheet_920-225b.pdf

Our test procedures only require the hand pump to generate a pressure above 30 bar using the handles. When you get to around 25 bar it is quite difficult to generate the last 5 bar.
We probably quote 40 bar on the datasheet as this is achievable using the Volume Control as follows:- With the Volume Control turned anti-clockwise to its maximum limit (the red line), a pressure gauge fitted into the top port, the hose fitted but with the end connection capped off.
Generate 30 bar with the handles, then using the Volume Control 40 bar can be achieved.
For customers wanting to generate pneumatic pressure of 30 to 40 bar the PV411A is probably a better option.
For customers wanting to generate pneumatic pressure of 20 to 25 bar then the PV211 would be suitable.

The part number for the 3/8 BSP Male to 1/4 BSP Female adaptor is 1S-54-0132.

We don’t have or provide any pressure proof tested certificate for hose assembly part number PV411-105.

The hose does have a label stuck to it which is marked with text :-

https://www.bakerhughes.com/sites/bakerhughes/files/2024-08/do_we_have_a_pressure_proof_test_certificate_for_hose_assembly_part_number_pv411-105_1.jpg

PV411

and the manufacturer where these hoses are purchased from have been proof tested, but no cert is issued or available.

The three pressure ports shown below are available in the «Pressure Port Kit – 1/4 BSP» – part number PV411-146

https://www.bakerhughes.com/sites/bakerhughes/files/2024-08/the_three_pressure_ports_shown_below_are_available_in_the_pressure_port_kit_1_4_bsp_part_number_pv411146_1.jpg

The PM620 pressure port on the PV622G is not self sealing, you need to use the blanking
plug P/N IO620-BLANK.
Number 3 in Section 4.1 of the attached Safety and Quick Reference Guide K0458
mentions that a blanking plug should be used if a PM620 is not connected.

Descargas

Tipo de archivo
TipoTítuloIdiomaFormatoDescargar
DatasheetsDruck PV411A Datasheet ENEnglishPDFDescargar
DatasheetsDruck PV411A Four In One Hand Pump Datasheet ENEnglishPDFDescargar
User ManualsPV411A Operating Guide K0259 multilingualMultilingualPDFDescargar

Contact us

A Druck expert is ready to listen by email, contact form and phone.

UK & Europe: +44 (0)1293 526 465
USA & Canada: +1 346 330 1150
France: +33 562 888 250
China: +86 800 9159 966